213nm脉冲激光器
型号：LLBQ213-10mw
LLBQ213-10mw全固态213 nm的紫外脉冲激光器广泛用于紫外光固化，微电子，光盘雕刻，激光医疗，科学实验等
参数
|
Wavelength (nm)波长 |
213±1 |
|
|
Operating mode工作方式 |
Frequency conversion of Q-switched pulsed laser |
|
|
Max average power (mW)(1) 平均功率 |
10 |
|
|
Single pulse energy (μJ)单脉冲能量 |
0. 1~0.8 |
|
|
Pulse duration (ns)脉宽 |
|
|
|
Peak power(kW)峰值功率 |
0.01~0.08 |
|
|
Rep. rate (kHz) |
QCW 频率 |
9kHz-15kHz |
|
Power Stability (rms,over 4 hours) 工作稳定性 |
<5% |
|
|
Transverse mode 横模模式 |
Near TEM00 |
|
|
Warm-up Time (minutes) 预热时间 |
<10 |
|
|
Operating temperature (℃) 工作温度 |
10~35 |
|
|
Warranty保修 |
1 year |
|
(1) Average power (mW)= Single pulse energy (μJ)* Rep. rate(kHz)
| Model型号 | LLMPS-213 |
| Wavelength (nm)波长 | 213± 1 |
| Operating mode工作模式 | Q-switched pulsed laser |
| Max average power (mW)*输出功率 | ~80 |
| Single pulse energy (µJ)单脉冲能量 | ~20 |
| Pulse duration (ps)脉宽 | ~ 1000 |
| Peak power (kW)峰值功率 | 20 |
| Rep. rate (kHz) (optional)频率 | 1~4 |
| Ave power stability (over 4 hours)功率稳定性 | <5%, <3%, <2% |
| Transverse mode光斑模式 | TEM00 |
| Beam diameter at the aperture (mm)光斑 | ~ 1.5 |
| Beam divergence, full angle (mrad)发散角 | < 1.5 |
| Warm-up time (minutes)上升时间 | <5 |
| Beam height from base plate (mm)中心高 | 32 |
| Cooled method (Fan Cooled)制冷 | TC |
| Operating temperature (C)工作温度 | 15~30 |
| Expected lifetime (hours)寿命 | 10000 |
| Warranty保修 | 1 year |
213nm紫外激光器
型号：LLQ213-30mw
LLQ213-30mw全固态213 nm的紫外激光器广泛用于紫外光固化，微电子，光盘雕刻，激光医疗，科学实验等
| Wavelength (nm)波长 | 213± 1 | |
| Operating mode | Pulsed | |
| Output power (mW) | 10 | 30 |
| Power stability (rms, over 4 hours) | <3% ，< 1% | |
| Pulse width (ps) | <50 | |
| Beam divergence, full angle (mrad) | <3 | |
| Beam diameter (mm) | ~2 | |
| Repetition frequency (MHz) | 5 | |
| Beam height from base plate (mm) | 128 | |
| Cooled method | Air cooled | |
| Warm-up time (minutes) | < 15 | |
| Operating temperature (C) | 15~30 | |
| Power supply (AC 220V) | PSU-DPS-Pico | |
| Expected lifetime (hours) | 10000 | |
| Warranty | 1 year | |
223nm脉冲激光器
LLQ223-30mw
LLQ223-30mw全固态223nm的紫外激光器广泛用于紫外光固化，微电子，光盘雕刻，激光医疗，科学实验等
| Wavelength (nm) | 223.5± 1 |
| Operating mode | Electro-optic Q-switched |
| Average power (W) | 1~30mW (30mW@ 10kHz) |
| Average power (W) = Single pulse energy (mJ) * Rep. rate (kHz) | |
| Single pulse energy ( µJ) | 1~3 (3μJ @ 10kHz) |
| Rep. rate (kHz) | 10 |
| Pulse duration (ns) | ~4 @ 10kHz |
| Peak power (kW) | ~0.75 (0.75kW@ 10kHz) |
| Ave power stability (over 4 hours) | <3%, <5% |
| Warm-up time (minutes) | < 10 |
| Beam divergence, full angle (mrad) | <5 |
| Beam diameter at the aperture ( 1/e2,mm) | <8 |
| Beam height from base plate (mm) | 68.5 |
| Cooled method | Air cooled |
| Operating temperature (C) | 10~35 |
| Power supply (220/ 110VAC) | PSU-AOM (3U) |
| Expected lifetime (hours) | 10000 |
| Warranty period | 1 year |
| Wavelength (nm)波长 | 236±1 |
| Operating mode工作方式 | Frequency conversion of Q-switched pulsed laser |
| Max average power (mW)*功率 | 1~3 |
| Single pulse energy (µJ)能量 | 1~3 |
| Pulse duration (ns)脉宽 | ~ 1.4 |
| Peak power (kW)峰值功率 | 0.71~2. 14 |
| Rep. rate (kHz)(optional)频率 | 0.01~ 1.0 |
| Ave power stability (over 4 hours)功率稳定性 | <10%, <5%, <3% |
| Transverse mode光斑模式 | Near TEM00 |
| M2 factor光束质量 | <2.0 |
| Beam diameter at the aperture (mm)光斑 | ~ 1.5 |
| Beam divergence, full angle (mrad)发散角 | ~6.0 |
| Warm-up time (minutes)稳定时间 | <5 |
| Beam height from base plate (mm)中心高 | 27.4 |
| Operating temperature (°C)工作温度 | 10~35 |
| Power supply (90-264VAC)供电 | 220v |
| Warranty保修 | 1 year |
228nm脉冲激光器
LLQ228-40mw
LLQ228-40mw全固态213 nm的紫外激光器广泛用于紫外光固化，微电子，光盘雕刻，激光医疗，科学实验等
| Wavelength (nm) | 228± 1 |
| Operating mode | Electro-optic Q-switched |
| Average power (W) | 1~40mW (40mW@ 10kHz) |
| Average power (W) = Single pulse energy (mJ) * Rep. rate (kHz) | |
| Single pulse energy ( µJ) | 1~4 (4µJ @ 10kHz) |
| Rep. rate (kHz) | 10 |
| Pulse duration (ns) | ~4 @ 10kHz |
| Peak power (kW) | ~ 1 ( 1kW@ 10kHz) |
| Ave power stability (over 4 hours) | <3%, <5% |
| Warm-up time (minutes) | < 10 |
| Beam divergence, full angle (mrad) | <5 |
| Beam diameter at the aperture ( 1/e2,mm) | <8 |
| Beam height from base plate (mm) | 79 |
| Cooled method | Water cooled |
| Operating temperature (C) | 10~35 |
| Power supply (220/ 110VAC) | PSU-AOM (3U) |
| Expected lifetime (hours) | 10000 |
| Warranty period | 1 year |
LLQ248-20mw全固态248nm的紫外激光器广泛用于紫外光固化，微电子，光盘雕刻，激光医疗，科学实验等
| Central wavelength (nm)中心波长 | 248±1 |
| Operating mode工作方式 | Acousto-Optic Q-switched |
| Average power (mW)平均功率 | 1-20@4KHz |
| Pulse duration (ns)脉宽 | <30@4KHz&20mW |
| Single pulse energy (µJ)能量 | 0. 1-5 |
| Peak power(W)峰值功率 | 5~ 160 |
| Power stability (rms, over 4 hours)功率稳定性 | <5% |
| Spectral purity | >99% |
| Beam height from base plate (mm)中心高 | 61 |
| Warm-up time (minutes)稳定时间 | <10 |
| Cooled method制冷 | Water Cooled |
| Power supply供电 | 220v可调 |
| Expected lifetime (hours)工作寿命 | 10000 |
| Warranty period保修 | 1 year |
244nm激光器
LLQ244-15mw
LLQ244-15mw全固态244 nm的紫外激光器广泛用于紫外光固化，微电子，光盘雕刻，激光医疗，科学实验等
| Central wavelength (nm) | 244±1 |
| Operating mode | Acousto-Optic Q-switched |
| Average power (mW) | 1- 15@4KHz |
| Pulse duration (ns) | <30@4KHz& 15mW |
| Single pulse energy (µJ) | 0. 1-3.75 |
| Peak power(W) | 3~ 125 |
| Power stability (rms, over 4 hours) | <5% |
| Spectral purity | >99% |
| Beam height from base plate (mm) | 61 |
| Warm-up time (minutes) | < 10 |
| Cooled method | Water Cooled |
| Power supply | PSU-AOM (3U) |
| Expected lifetime (hours) | 10000 |
| Warranty period | 1 year |
