新研制的LBCD系列直线滚珠南京NSK轴承安装方便，额定载荷高，使用寿命长。优化后，聚合物保持架设计减少了构件的数量，并且具有较大的滑动滚道、优化的滚珠驱动面积和更大的储油面积。由于这些特性，LBCD产品运行非常平稳，摩擦和噪声水平低，因此它们特别适合于敏锐应用，如医学工程。
The newly developed LBCD series linear ball bearing of Nanjing NSK has convenient installation, high rated load and long service life. After optimization, the polymer cage design reduces the number of components, and has a larger sliding raceway, optimized ball drive area and larger oil storage area. Because of these characteristics, LBCD products run very smoothly and have low levels of friction and noise, so they are particularly suitable for sensitive applications, such as medical engineering.
塑料球南京NSK轴承具有耐腐蚀、耐化学腐蚀和重量轻的特点。它们还可以实现安静的操作，并具有良好的阻尼性能。聚丙烯或聚甲醛是制造轴承环的标准材料，但也可以根据需要使用其余聚合物。球可以由聚合物、不锈钢、玻璃或其余材料制成，而笼则由聚酰胺或聚丙烯制成。塑料球轴承具有自润滑、摩擦系数小的特点。
The plastic ball Nanjing NSK bearing has the characteristics of corrosion resistance, chemical corrosion resistance and light weight. They can also achieve quiet operation and have good damping properties. Polypropylene or polyformaldehyde is the standard material for making bearing rings, but other polymers can also be used as needed. Balls can be made of polymers, stainless steel, glass or other materials, while cages are made of polyamide or polypropylene. The plastic ball bearing has the characteristics of self lubrication and small friction coefficient.
它们可以干燥而不需要其余润滑剂。南京NSK轴承特别适用于润滑剂不能用于清洗的场合。高比强度（强度与重量比）也是聚合物轴承的优良特性，特别是在重量是重要设计考虑的应用中。塑料球轴承通常用于须得防潮、耐化学腐蚀、不可用或只能在某些制约条件下使用的情况。
They can be dried without the need for other lubricants. Nanjing NSK bearings are especially suitable for occasions where lubricants can not be used for cleaning. High specific strength (strength to weight ratio) is also an excellent characteristic of polymer bearings, especially in applications where weight is an important design consideration. Plastic ball bearings are usually used in situations where moisture proof, chemical resistance, unavailability or limited use is required.
南京NSK轴承单元适用于许多特殊用途。在单个注塑成型工艺中，轴承可涂覆聚合物，并与高密度、耐磨的金属粉末齿轮组合以形成齿轮单元，例如干草打包机的紧固单元。其余轴承可涂覆玻璃纤维增强聚丙烯，使支承轴适用于洗衣机。铸造聚酰胺可用于生产耐腐蚀轴承外壳。
The Nanjing NSK bearing unit is suitable for many special purposes. In a single injection molding process, bearings can be coated with polymers and combined with high-density, wear-resistant metal powder gears to form gear units, such as the fastening unit of a hay baler. The remaining bearings can be coated with glass fiber reinforced polypropylene, so that the supporting shaft is suitable for washing machines. Cast polyamide can be used to produce corrosion resistant bearing housings.
南京NSK轴承聚四F乙烯聚酰胺套管具有壁厚小、导热性好、在中压下滑动速度快等优点。它们具有优异的承载能力和良好的耐磨性，是具有成本效益的产品。复合衬套、止推垫圈和垫圈由钢背和多孔青铜三明治以及聚甲醛或聚四F乙烯加二硫化钼(M化合物)的表面层制成。
Nanjing NSK bearing PTFE polyamide sleeve has the advantages of small wall thickness, good thermal conductivity and high sliding speed under medium pressure. They have excellent load carrying capacity and good wear resistance, and are cost-effective products. Composite bushings, thrust washers and gaskets are made of steel backed and porous bronze sandwiches and a surface layer of polyoxymethylene or polytetrafluoroethylene plus molybdenum disulfide (M compound).
文章来自：南京SKF轴承 www.wh-skf.com
The article is from: Nanjing SKF bearing www.wh-skf.com
文章来自：南京INA轴承 www.ina-china.cn
The article is from: Nanjing INA bearing www.ina-china.cn
文章来自：南京NSK轴承 www.klbbearings.com
The article is from: Nanjing NSK bearing www.klbbearings.com
QQ：524085168
电话：0510-81207777
手机：13311666672
