车徐州NSK轴承使用维护说明书摘要：在额定载荷范围内严重过载直接导致轴承过载过早失效，导致汽车故障、人身安稳事故、禁止轴承异常冲击载荷、定期检查轴承运行状态、注意轴承磨损。轴承零件有异响，是否有局部急剧温升现象。定量的流体动力和流体静力学轴承需要定期安装。
Xuzhou NSK bearing operation and maintenance instructions abstract: Serious overload within the rated load range directly leads to premature failure of bearing overload, leading to automobile failure, personal safety accident, prohibition of abnormal impact load bearing, periodic inspection of bearing operation status, attention to bearing wear and tear. Bearing parts have abnormal sound, whether there is a local sharp temperature rise phenomenon. Quantitative hydrodynamic and hydrostatic bearings need to be installed regularly.
汽车轴承的使用和维护：
Use and maintenance of automobile bearings:
（1）车辆应在额定载荷范围内工作。如果过载严重，将直接导致轴承过载，从而导致轴承早期失效。更严重的是，徐州NSK轴承会导致车辆故障和人身安稳事故。
(1) Vehicles shall work within the rated load range. If the overload is serious, it will directly lead to the bearing overload, which will lead to the early failure of the bearing. More seriously, Xuzhou NSK bearings will lead to vehicle failure and personal safety accidents.
（2）禁止轴承承受异常冲击载荷；
(2) It is forbidden for bearings to bear abnormal impact loads;
（3）定期检查轴承的使用情况，注意轴承部位是否有异常噪音和局部温升急剧。
(3) Check the use of bearings regularly, and pay attention to whether there is abnormal noise and sharp local temperature rise in the bearing parts.
（4）按要求定期定量注入润滑油或润滑油；
(4) regular and quantitative injection of lubricating oil or lubricating oil as required;
（5）根据车辆使用情况，每半年至少更换一次润滑油，并仔细检查轴承。
(5) According to the use of vehicles, at least once every six months to replace the lubricant, and carefully check the bearings.
（6）徐州NSK轴承的大修检查：用煤油或汽油清洗和解体轴承，仔细观察轴承内外圆柱面有无滑动或爬行，轴承内外滚道有无剥落或点蚀，滚动体和保持架有无磨损（bASIC失效形式为CO）。（a）构件变形和轴承综合检查的确定。我们能继续用吗？
(6) Overhaul inspection of NSK bearings in Xuzhou: cleaning and disassembling bearings with kerosene or gasoline, carefully observing whether the inner and outer cylindrical surfaces of bearings slide or creep, whether the inner and outer raceways of bearings peel off or pit corrosion, whether the rolling bodies and cages wear (bASIC failure form is CO). (a) Deformation of components and determination of comprehensive inspection of bearings. Can we continue to use it?
（7）工业轴承是精细零件。注意使用。即使高性能轴承使用不当，也不能达到预期的性能效果，容易造成轴承损坏。
(7) Industrial bearings are fine parts. Pay attention to the use. Even if the high-performance bearings are used improperly, they can not achieve the expected performance effect, which is easy to cause bearing damage.
（8）徐州NSK轴承具有额定负荷高、噪音低、维护成本低、运行时间长的优点。在识别真轴承或假轴承时，可通过触摸轴承上的钢印更快、更准确地识别轴承。用手触摸邮票时不会触摸它，但轻轻触摸钉子可以感觉到邮票的存在。
(8) Xuzhou NSK bearings have the advantages of high rated load, low noise, low maintenance cost and long running time. When identifying true or false bearings, the bearings can be identified more quickly and accurately by touching the steel stamps on the bearings. The stamp will not be touched when touching it by hand, but the existence of the stamp can be felt by touching the nail lightly.
文章来自：徐州SKF轴承 www.wh-skf.com
Article from: Xuzhou SKF Bearing www.wh-skf.com
文章来自：徐州INA轴承 www.ina-china.cn
Article from: Xuzhou INA Bearing www.ina-China.cn
文章来自：徐州NSK轴承 www.klbbearings.com
Article from: Xuzhou NSK Bearing www.klbbearings.com
QQ：524085168
电话：0510-81207777
手机：13311666672/13395185757
