KSB ISORIA 10手动蝶阀设计规范
Semi lug type body (Type 2): DN 40 to 600
Full--lug type body with raised faces (Type 4): DN 40 to 600
Flanged body with flat faces (Type 5): DN 150 to1000
Possible downstream dismantling and end of line for bodies
Types 2, 4 and 5.
Face--to--face dimensions in accordance with:
ISO 5752 series 20, EN 558--1 series 20.
Connection according to standards page 9.
Marking in accordance with EN 19.
Mounting plate meeting the ISO 5211 standards.
Valves perfectly tight shut--off (no visible leakage at the naked
eye) in either flow direction, in accordance with the following
standards:
EN 12266--1/leak level A and ISO 5208 category A.
Body coated with polyurethane paint, thickness 80←m,
colour blue ref. RAL 5002.
Discs: spheroïdal graphite cast iron coated with epoxy paint,
thickness 80 ←m, colour brown ref. RAL 8012.
The valves meet the safety requirements of the pressure
Equipments Directive 97/23/EC (PED) appendix I for fluids
of the groups 1 and 2.
Standard variants
Pneumatical actuator ACTAIR / DYNACTAIR
Electrical actuator ACTELEC
Hydrautical actuator ACTO
Limit switches AMTROBOX
POSTTTIoner AMTRonIC / SMARTRONIC
ATEX version in accordance with 94/9/EC directive
Remarks
Actuator selection 8444.11-10
Operating instructions 8449.8-10
Data to be supplied when ordering
ISORIA 10 series valve in accordance with type series booklet
8444.1/8-10.
Size.
Working conditions : -- Nature of fluid,
-- Pressure,
-- F l o w
-- Temperature.
Connection.
Actuation.
KSB ISORIA 10手动蝶阀实物图：
